Guitars
PRS SE Custom 24 Burled Ash Limited Edition with Seymour Duncan Alnico II Pros, Partial Splits & TKL Hardshell Case - Natural
Guitars

PRS SE Custom 24 Burled Ash Limited Edition with Seymour Duncan Alnico II Pros, Partial Splits & TKL Hardshell Case - Natural

$875

Checkout, shipping, and payment are handled at shop.k7rhy.app.

Questions about this one?

I'm happy to talk about how it plays, how it was built, or shipping.

About this guitar

This is a natural-finish PRS SE Custom 24 Burled Ash Limited Edition, made in 2024, in excellent condition: I can't find a mark on it anywhere. The burled swamp-ash veneer over its maple top is the star, and no two of these look alike. Underneath it's a proper SE Custom 24, with a mahogany back, a Wide Thin maple neck, a rosewood fingerboard with bird inlays, 24 frets, a 25" scale, a PRS molded tremolo, and nickel hardware.

I upgraded it in 2026 with a Seymour Duncan Alnico II Pro set (APH-1b bridge, APH-1n neck), new switching with partial coil splits, a tone bypass, and PRS locking tuners.

It then became the jumping-off point for Relay, the guitar platform I design and document. Its sounds were where the Relay voicings began, and while I designed and built those, it stayed on my bench as the reference I compared every new build against.

The controls

It looks and works like a two-knob guitar: a five-way selector, a master volume, and a push-pull master tone.

  • Position 1, bridge: the full bridge humbucker, with firm lows, a rounded attack, and plenty of output for rhythm or lead
  • Position 2, bridge partial split: brighter and quicker than the full humbucker, with more body than a hard split
  • Position 3, both partial splits: both pickups partly split and played together; open, percussive, and airy
  • Position 4, neck partial split: open and responsive like a single coil, but with more body
  • Position 5, neck: the full neck humbucker, warm and articulate

The partial splits bridge one coil with a resistor instead of cutting it out, so they stay full instead of thin. The volume has a treble bleed, so the highs stay as you roll it back.

Pull the tone knob up and the tone control drops out of the circuit for full brightness. Push it back down and you're back to wherever the knob was set, so you can keep a darker setting ready and switch between the two without reaching for the knob mid-song.

The Alnico II Pros are warm and touch-sensitive, and this guitar is at its best in blues, funk, soul, folk, jazz, and yacht rock, anywhere the space between clean and breakup matters.

What's included

  • A black TKL hardshell case with a plush interior

The original factory pickups aren't included.

Shipping

It ships in its hardshell case, packed inside a guitar shipping box, with tracking. Shipping is calculated at checkout.

For your tech

  • Pickups: Seymour Duncan APH-1b and APH-1n Alnico II Pro, four-conductor, screw coils toward the bridge
  • Selector: Oak Grigsby four-pole five-way super switch
  • Splits: partial, through 1.8 kΩ resistors; bridge in positions 2 and 3, neck in positions 3 and 4
  • Volume: 500 kΩ, with a 180 pF treble-bleed capacitor
  • Tone: 500 kΩ push-pull, 0.022 µF film capacitor; pulling up disconnects the capacitor
  • Cavity: shielded with copper foil
  • Tuners: PRS locking

Questions about it, or about how it plays? Get in touch. I'm happy to talk about it.